Design assessments

Full-custom assessment.

Where a few cell types repeat very many times and carry a chip's energy or area, full-custom design can go beyond a standard-cell flow. We show which blocks in your design qualify, and what the work involves.

For
Teams with an AI accelerator, an NPU or another compute-heavy design on a standard-cell flow
You provide
RTL or a netlist of the candidate blocks, with the present PPA results and targets
You receive
A written assessment
Method
Nine stages, from fit and partitioning to silicon correlation

What we assess

Where full-custom design belongs.

  1. Fit

    Which blocks are regular and repeated enough: MAC arrays, multipliers, adder trees and pipeline registers.

  2. Depth of customisation

    From custom cells in a standard flow to hand-crafted netlists and manual place and route.

  3. Libraries and voltage

    Whether re-characterising the cell library, including at ultra-low voltage, opens a better operating point.

  4. Clocking

    Where a custom clock tree lowers clock power in a pipelined datapath or a regular array.

  5. Baseline

    The standard-cell result the custom block will be measured against.

  6. Our record

    Our full-custom work on TSMC 16 nm FinFET used custom multi-bit flip-flops and adders, low-voltage re-characterisation of foundry cell libraries, hand placement of the compute core, and multi-corner timing and IR sign-off.

What you receive

A written assessment.

  1. The blocks that qualify

    And those better left to the standard flow.

  2. The depth for each

    The depth of customisation recommended for each block.

  3. Baseline and evidence

    The baseline, and the evidence each stage will produce.

  4. The next stage

    A proposed scope and quotation.

Questions about full-custom assessment

Does full-custom design suit every chip?

It suits blocks, not whole chips: datapaths where a small number of cell types are designed once and used very many times. The rest of the chip stays on a standard flow.

How much can it gain?

That depends on the block and its baseline, so the assessment begins by fixing the baseline the custom block will be measured against.

Which processes do you work on?

We are a TSMC direct account, and our design work covers FinFET nodes at 16 nm, 12 nm, 7 nm and 6 nm.

A block that carries your chip's energy?

Send its specification and current results.

  1. Fill in the project form
  2. We reply by email within a few working days
  3. Onboarding: NDA, design review and a staged plan

The form is the fastest way to reach us. A person reads every request.