Design assessments
ASIC feasibility study.
Before a project starts: can the product be an ASIC, on which process, at what cost and by when? We answer from your specification, or from the FPGA or board-level design you want to turn into a chip.
- For
- Product teams weighing an ASIC against an FPGA or standard parts
- You provide
- Requirements or a specification, target volumes and schedule
- You receive
- A written feasibility report
- Next step
- Spec-in design, or a cost and process node assessment
What the study covers
The questions a board will ask, answered one by one.
Function and architecture
What the chip must do, the architecture options, and what each one costs in area and power.
Process and foundry route
The candidate process nodes, and the IP and memories each one offers.
Die size and package
A first estimate of die area, pin count and package.
One-off and unit cost
Engineering, IP, masks and prototypes on one side; wafers, packaging and test per part on the other.
Schedule
The path from specification to first parts, stage by stage.
Risks
What could move the cost or the date, and how each risk can be retired early.
What you receive
A written feasibility report.
A clear recommendation
Build the ASIC now, wait, or stay with the present solution.
Options side by side
Architecture and process options, compared.
Cost and schedule ranges
With the assumptions behind them.
The next stage
A proposed scope and quotation for the design phase.
Questions about feasibility
When does an ASIC make sense?
When the product's volume and lifetime can carry the one-off cost, or when an FPGA or standard parts cannot reach the power, size or performance you need. The study works out both sides for your product.
Can you start from an FPGA design?
Yes. An FPGA design shows the function and gives us RTL to estimate from; the study adds what an ASIC changes: memories, clocking, I/O, test and the process.
Do we need a finished specification?
No. Requirements, target volumes and a schedule are enough to begin; the study shows which open points matter most.
Related pages
Weighing an ASIC?
Send your requirements, volumes and schedule.
- Fill in the project form
- We reply by email within a few working days
- Onboarding: NDA, design review and a staged plan
The form is the fastest way to reach us. A person reads every request.